Guide
How to read a certificate of analysis
A certificate of analysis is the report an independent laboratory issues after analyzing a sample from a lot. Here is how to read and verify one in a few minutes.
1. Identify the document
Before looking at the results, make sure the certificate matches your product.
- Laboratory
- Name and address of the laboratory that performed the analysis. It should be independent of the manufacturer.
- Report number
- Unique report identifier, which lets you verify it with the laboratory.
- Lot
- Must match the lot number printed on your vial's label.
- Substance analyzed
- The name of the peptide tested.
- Dates
- Analysis date and report issue date.
- Labelled content
- The amount printed on the label (e.g. 10 mg), used as the reference for the content test.
2. Understand the tests
A complete certificate answers four questions: is it the right molecule, is it pure, is there the right amount, and is the product free of contamination.
| Test | What it checks | Common method | What to look for |
|---|---|---|---|
| Identity | That the molecule present is the stated peptide. | Infrared spectroscopy (FTIR), USP <197A>, or mass spectrometry (MS) | “Confirmed” |
| Purity | The proportion of peptide relative to impurities (fragments, synthesis residues). | High-performance liquid chromatography (HPLC), USP <621> | Usually 98% or higher |
| Measured content | The actual amount of peptide in the vial, compared with the label. | HPLC | Between 90% and 110% of the labelled content |
| Total mass | The weight of the vial's entire contents, including salts and excipients. | Weighing, USP <41> | For information |
| Sterility | The absence of living bacteria and fungi. | USP <71> | “Sterile” or “Pass” |
| Endotoxins | Toxins left by certain bacteria, even dead ones. | LAL test, USP <85> | Below the stated limit (in EU/mg) |
High purity alone is not enough: a vial can be 99% pure and still contain less peptide than stated. That is why measured content matters as much as purity.
3. A real example
Here are the results from the certificate for BPC-157 10 mg, lot GN2605, analyzed by BTLabs.
| Test | Specification | Result | What it means |
|---|---|---|---|
| Identity (FTIR) | Confirms the peptide | ConfirmedPass | It is indeed BPC-157. |
| Purity (HPLC) | ≥ 98 % | 99,8 %Pass | Only 0.2% impurities. |
| Measured content | 90 – 110 % de 10 mg | 10,3 mg (103 %)Pass | The vial contains slightly more than the stated 10 mg. |
| Total mass | As measured | 103,4 mg | Includes salts and excipients, normal for a lyophilized product. |
4. Red flags
- The lot number on the certificate does not match your vial.
- No report number, or a laboratory that is not named.
- Only purity is shown, with no identity or measured content.
- Results with no test method or specification.
- A very old certificate, or one issued in another company's name.
- A blurry, cropped or seemingly altered image.
5. Verify authenticity
- Scan the QR code on the label: it leads directly to the product page and its certificate.
- Compare the lot number on the label with the one on the certificate.
- View the original certificate : OH Pharma publishes every certificate exactly as issued by the laboratory, as an image and PDF, including out-of-specification results.
- Contact the laboratory with the report number if you want direct confirmation.
A certificate applies to the sample analyzed and the lot it comes from. It is not a guarantee for each individual vial.
For educational purposes only; not medical advice.
OH